Water treatment equipment
Salt water with pH and ORP control
Fully automatic: the ORP probe measures the redox potential and the salt chlorinator switches on and off by itself.
Price from
1 500 €
incl. VAT
Back to Water treatment equipment
Fully automatic: the ORP probe measures the redox potential and the salt chlorinator switches on and off by itself.
Salt chlorination unit
Get clean water using salt. Gentler on you and on nature.
Fewer chemicals, more comfort - with Mr.Pure, the water in your pool will be perfectly clean and gentle at the same time.
The salt chlorination unit harnesses the natural power of salt and greatly reduces the need for additional water treatment. The result is pleasant, soft water that doesn't irritate eyes or skin = ideal for the whole family.
Just 1.8-5 kg of salt per 1,000 litres of water.
Electrolysis breaks salt down into sodium and chloride.
Lower chlorine concentration than with chemical products.
High-quality build. Cell lifespan of up to 12,000 hours.
Gentle water disinfection.
Maintains stable water quality.
Clean your water the smart, eco-friendly way
Use the natural power of salt for perfectly clean water.
The Mr.Pure salt chlorination unit cleans water by electrolysis, a process in which electrodes produce disinfecting agents from salt water.
These reliably keep the water clean and hygienic. Once they have done their job, they turn back into salt, which is recycled within the system.
This means there's no need to keep topping up the salt, and the whole process runs automatically - hassle-free and without unnecessary chemicals.
Special turbo mode
Thanks to the special turbo mode, you can boost the salt chlorinator's output to 130% for up to 24 hours. You'll appreciate this whenever you need to add chlorine to the water urgently.
When turbo mode ends, the salt chlorinator automatically switches back to the original settings. You can also return to normal operation earlier at any time - just press a button.
Low salt concentration
The ideal concentration is 3 kg of salt per 1,000 litres of water. That's far less than you'll find in seawater. It also produces a lower chlorine concentration than chemical products, so the water is gentler on your eyes and skin.
All you need to do is add the salt to the water 24 hours before chlorination begins. Then, after another 6-8 hours, you can go for a swim.
Minimal maintenance
Forget constant checks and complicated maintenance. The Mr.Pure salt chlorination unit practically runs itself. During electrolysis, disinfecting agents are produced from the salt and then turn back into salt again, so you only need to top up the salt about once every six months.
Maintenance is just as simple - roughly once every six months, simply check and clean the pH and redox potential probes. There's nothing else to worry about.
Forget constantly cleaning your water. The salt chlorination unit keeps the pool water quality stable, exactly according to the parameters you set yourself.
What's more, you can change them at any time, either on the touch control panel or via the mobile app.
That way, you're always in control. Anytime, anywhere.
Comfort for kids Ease of use Energy savings Smart control Other features
Comfort for kidsEase of useEnergy savingsSmart controlOther features
Mr.Pure provides gentle pool water care that's ideal for children, people with sensitive skin and anyone who demands the highest quality. No irritated eyes, dry skin or damaged hair - just freshness and hydration.
The salt chlorination unit from Spanish manufacturer Innowater is a compact unit with an IP65 protection rating. It can withstand even higher humidity in the room where it's installed. Another advantage is that it's self-cleaning, with an adjustable reversal interval. The cell lifespan is rated at up to 14,000 operating hours. Automatic pH dosing is also included. The dosing pump connects to the control unit wirelessly (radio signal). Automatic chlorine dosing via an ORP (Rx) probe is included as well - fully automatic pH+Cl treatment.
A compact salt water treatment unit designed for private pools, with IP65 protection and the option to connect a mechanical flow switch, a salinity sensor and remote control over the internet. The unit features integrated automatic output adjustment based on pool cover status and pH regulation. The VA SALT SMART unit comes with a pH kit (pH probe) and an ORP (Rx) probe for automatic chlorine regulation.
Click a row to send a no-obligation enquiry. We will gladly confirm the price and the right variant.
